ZTE R209-Z factory unlock code is now available. You can place the order using the link given at the end of this post. It is so popular that is sold by the network providers in locked status. The good news is that it can be unlocked using a correct Unlock/NCK code. Once the ZTE R209-Z router is unlocked, it will work with any SIM in any part of the country and worldwide.
How to Unlock ZTE R209-Z Router
- Make sure your ZTE R209-Z router is at least 30% charged. If not, then charge it.
- Switch off your router and insert a non-acceptable Network SIM (i.e. if your router is locked to Network “A” then insert the sim of Network “B”) on your ZTE R209-Z router.
- Switch ON your router after inserting the SIM card in it.
- Now connect your router using a USB cable or establish a WiFi connection to ZTE R209-Z router with your computer.
- Open “My Computer” and install the drivers from the virtual CD Rom if not installed already.
- The web browser should open automatically. If not, then open it manually and login to your device’s dashboard at http://192.168.0.1 or http://192.168.1.1 or http://192.168.8.1 depending on ZTE R209 IP address.
- Type admin if prompt to enter the password.
- It should redirect you to the unlocking page automatically. If not, then go to Setting and search for the option to enter the Unlock/NCK code in your router.
- Enter the correct Unlock/NCK code received from unlockmyrouter.com and click OK, Your router might reboot to display the new network.
The unlock/NCK code is not free. Place the order only if the router is asking to enter an unlock code after inserting an unsupported SIM.